33' Apaches
#2
Registered

Joined: Feb 2003
Posts: 6,192
Likes: 318
From: Lafayette,La
#6
Not sure on the cc's. I was thinking of the sport deck. Here is some good reading.
http://www.offshoreonly.com/forums/s...archid=1547688
http://www.offshoreonly.com/forums/s...archid=1547688
#7
Thread Starter
Registered
Joined: Aug 2007
Posts: 373
Likes: 1
Not sure on the cc's. I was thinking of the sport deck. Here is some good reading.
http://www.offshoreonly.com/forums/s...archid=1547688
http://www.offshoreonly.com/forums/s...archid=1547688
#8
Can't remember the screen name right now but one of our memebers has a 33 with JCPERF 800's and Konrads, boat runs 90 mph.... I was docked next to it up in Patchogue Long Island, really nice boat! Owner lives upstate new york.
#9
I may not get this entirely right, so feel free to correct me.
There was a narrow beam and a wide beam, a small handful of each.
The narrow beam was a little scary. If I remember correctly the first one was made for Ben's dad, and they stuffed it coming into Govmnt Cut day 1.....
There was a narrow beam and a wide beam, a small handful of each.
The narrow beam was a little scary. If I remember correctly the first one was made for Ben's dad, and they stuffed it coming into Govmnt Cut day 1.....
#10
Thread Starter
Registered
Joined: Aug 2007
Posts: 373
Likes: 1
I may not get this entirely right, so feel free to correct me.
There was a narrow beam and a wide beam, a small handful of each.
The narrow beam was a little scary. If I remember correctly the first one was made for Ben's dad, and they stuffed it coming into Govmnt Cut day 1.....
There was a narrow beam and a wide beam, a small handful of each.
The narrow beam was a little scary. If I remember correctly the first one was made for Ben's dad, and they stuffed it coming into Govmnt Cut day 1.....


