350 high performance intake manifold
10-30-2007 | 06:10 PM
#1
Thread Starter
Registered
Joined: Apr 2005
Posts: 583
Likes: 8
From: Long Island
350 high performance intake manifold
Does anyone know who makes a high performance intake manifold for a 350 mag that is marine. cant find any.all are aluminum and not bronze lined . Thanx chris
10-30-2007 | 07:40 PM
#4
Registered
Joined: Nov 2006
Posts: 1,313
Likes: 153
From: Tygart Lake, WV
Ebasic power has aluminum dual plane Vortec manifolds with bronze lined crossovers. EDM531170. Hope this helps!
Even boating in salt water a regular aluminum one would last many years if flushed with fresh water after use.
Even boating in salt water a regular aluminum one would last many years if flushed with fresh water after use.
11-06-2007 | 10:22 AM
#6
Registered
Joined: Nov 2007
Posts: 3
Likes: 0
Your stock one is the high performance version. Having the Mag, you have the bowtie high rise cast iron version. It dynos right along with the aluminum edelbrock performer rpm series. Behind your carb should be a bowtie stamped into the intake runner along with the part number.
Thread
Thread Starter
Forum
Replies
Last Post
2 Trick Rick
General Q & A
8
11-10-2006 03:50 PM
2 Trick Rick
General Q & A
0
09-28-2006 03:49 PM
