Surface drive CC's?
11-24-2007 | 12:48 PM
#1
Thread Starter
Registered
Joined: Nov 2005
Posts: 87
Likes: 0
From: Millsboro, DE
Surface drive CC's?
I was going to post this on Anglersonly.com but the forum is loaded up with porn spam.
Who here has a CC with a surface drive setup?
I'm primarily interested in how clean the wake is at a 6 knot trolling speed.
Who here has a CC with a surface drive setup?
I'm primarily interested in how clean the wake is at a 6 knot trolling speed.
11-24-2007 | 05:10 PM
#2
Thread Starter
Registered
Joined: Nov 2005
Posts: 87
Likes: 0
From: Millsboro, DE
11-25-2007 | 09:04 AM
#6
Registered
Joined: Jul 2003
Posts: 1,932
Likes: 12
From: ME and NH
I might suggest posting this in the Nor-Tech forum, or just go buy this boat...
http://www.yachtworld.com/core/listi...currencyid=100
http://www.yachtworld.com/core/listi...currencyid=100
11-25-2007 | 11:51 AM
#9
Thread Starter
Registered
Joined: Nov 2005
Posts: 87
Likes: 0
From: Millsboro, DE
I'll check out nor tech forum, thanks.
Yes but no more than OB's - still a PIA.
One downside I see is the engines being in the boat at the transom so you'd have a large engine hatch to deal with or motor box on a single engine app.
So to add another question has anyone used jackshafts with surface or pulse drives?
Yes but no more than OB's - still a PIA.
One downside I see is the engines being in the boat at the transom so you'd have a large engine hatch to deal with or motor box on a single engine app.
So to add another question has anyone used jackshafts with surface or pulse drives?
