I have a custom made cover for my 2007 30 Skater. It was built to completely cover the boat and engines(300 XS) tip to tip and all the way down to the bottom of the sides.

Color is Grey.

The cover is made out of Matrix Evolution 3, it's a car cover material that Porsche uses, water repellent, breathable and does not scratch the paint or clear coat.

It is also reinforced in all of the corners with Sunbrella.

It is 3 months old. It was only used once, indoors, never seen the Sun. I no longer have a use for it.

I originally paid $1300

Will sell for $800 and I'll take care of the shipping.

If it would stretch 2 feet I 'da bought it in a flash !!!!

Best of luck with the sale !!!

That's nothin a little duct tape couldn't fix,

This has got to be a 'score' for a 30 owner. I know there's only a few on OSO, I just don't have the time to hunt them down. If you happen to come across this and know a 30 owner, please pass it on. I hate to see this really nice cover not go to use.

Jim S. aka 'JIMKID MOTORSPORTS" just told me about your cover. I have a 2007 30 Skater, and may be interested in it. Do you have an pictures of it on the boat. Is the cover approiate for full time use, outdoors, in the wind? I store my boat on a lift 360ft out in the river, full time. What does the cover have for staps, to hold it on in the wind. Will I be able to get it on, and secured, while on the lift?

I was told that if I used the cover full time outdoors that it may only last 3 years or so. I decided to go with it, because the covers that last longer seem to be so abrasive and I've even noticed scuffing in the clear coat with my other boats and covers, especially in windy conditions. This cover is very soft, yet built strong to withstand the elements and of course reinforced in the necessary areas, to be more specific, tip of the sponsons, around the corners where the tie bar bolts to the steering plates, etc.. It is the draw string style, and ties up on one side.

Who made the cover ?