prop shaft adaptor
12-28-2007 | 02:30 PM
#1
Thread Starter
Registered
Joined: Dec 2007
Posts: 187
Likes: 0
prop shaft adaptor
i have a prop shaft 19spline but when i find a prop second hand to try on my boat its maby 25/26/spline how many splines are there or can i buy adaptors that will adapt to my 19 spline it would work out cheeper than getting a new shaft made everytime
cheers gerry
cheers gerry
12-28-2007 | 03:19 PM
#2
Registered
Joined: May 2002
Posts: 672
Likes: 2
From: BRIDGEWATER MA.
There is an adapter available from Arneson for the longer shaft approx. 6" hub.
http://www.arneson-industries.com/pa...id=performance
There is not one available for the short prop shaft, hub 4" approx..
If you have the small/ short shaft.The 19 spline tapered props are harder to come by.
I am having the same problem.
http://www.arneson-industries.com/pa...id=performance
There is not one available for the short prop shaft, hub 4" approx..
If you have the small/ short shaft.The 19 spline tapered props are harder to come by.
I am having the same problem.
Last edited by DONZI; 12-28-2007 at 03:42 PM.
Thread
Thread Starter
Forum
Replies
Last Post
MIKEHTMSR24
General Boating Discussion
3
07-22-2002 03:18 PM
