Does anyone know what the stock jet and power valve size is for a 1050 Holley Dominator carb. I bought a used one and it has 96 jets and block off instead of a power valve. I just need to get it back to stock so I have a base line to start from. it's a 0-9375-1

go on holleys web site...

I did and could not find what i needed.

I dont believe dominators use power valves, if I am not mistaken.

that would explain the block off plate

I will look at a couple of my old posts, i had a dominator challenge me with a tune for a whole season.....I finally got POED and sent it to pro systems.....

That would be great. I was trying to break in a new motor yesterday and could not get it to idle. This is the first dominator I have ever used.

Read through this post it will help ya....


http://www.offshoreonly.com/forums/s...inator+jetting

Thanks I will

If that does not help ya let me know and i will email ya my build sheet on my carb......I run a real big cam though, it may or may not help ya ......

That carb is probably a little big depending on what your motor cosists of.....