hi-6 mounting
04-06-2008 | 07:40 PM
#1
Thread Starter
Charter Member #139 /Moderator/Platinum Member
Joined: Nov 2000
Posts: 2,201
Likes: 0
From: McHenry IL /Duck Key FL
hi-6 mounting
has anybody mounted a Crane hi-6 to the engine they say not to.
If you have who makes a bracket to do it?
The bracket also has to hold the coil and rge mercathode
If you have who makes a bracket to do it?
The bracket also has to hold the coil and rge mercathode
__________________
Kept the Bullet and the condo and joined the cig 20 restoration club.
Kept the Bullet and the condo and joined the cig 20 restoration club.
04-06-2008 | 09:14 PM
#2
Charter Member
Joined: Nov 2000
Posts: 1,094
Likes: 0
From: Lake Charles, LA USA
I mounted mine on the bulkhead infront of the motors with GM style weather proof connectors on the motors' wiring harnesses that will unplug and allow engine removal without pulling the ignition boxes.
__________________
Long time cult member.
Long time cult member.
04-08-2008 | 10:16 AM
#3
Registered
Joined: Aug 2005
Posts: 207
Likes: 0
From: Las Vegas
I just made an aluminum shelf that mounted to the back of the transom. I used the fasteners that were coming thru for the swim platform. I mounted my HI-6 ignition box, Crane coil, Mercathode and fuel bypass regulator on the back shelf. Just make sure you ground the coil back to the engine.
Now my engine is very clean and you really can't see the shelf. I attached the photo for you to review..
Now my engine is very clean and you really can't see the shelf. I attached the photo for you to review..
Last edited by VegasHallett; 04-08-2008 at 10:17 AM. Reason: grammar
