Engine Stands / Shipping Crates?
06-09-2008 | 10:10 PM
#1
Thread Starter
Charter Member #34
Joined: Oct 2000
Posts: 7,151
Likes: 2
From: Beautiful North Carolina
Engine Stands / Shipping Crates?
I need two good quality engine stands or shipping crates for a couple of big block engines.
Need to safely move two engines a few hundred miles.
Who has them?
Need to safely move two engines a few hundred miles.
Who has them?
06-10-2008 | 08:18 PM
#2
Registered
Joined: Oct 2005
Posts: 1,073
Likes: 251
From: Waldorf, Md
Dock,
Are you moving them yourself ? In a pickup ? We have had very fgood luck using these: http://store.summitracing.com/partde...0&autoview=sku
Only thing I would suggest is NOT using the wheels while transporting in the bed of a truck. Otherwise they seem to work just fine. Should be available at almost any performance parts store.
Also, if you have a very deep oil pan, make sure to measure the stand first.
Are you moving them yourself ? In a pickup ? We have had very fgood luck using these: http://store.summitracing.com/partde...0&autoview=sku
Only thing I would suggest is NOT using the wheels while transporting in the bed of a truck. Otherwise they seem to work just fine. Should be available at almost any performance parts store.
Also, if you have a very deep oil pan, make sure to measure the stand first.
06-11-2008 | 04:26 PM
#3
Platinum Member
Joined: Sep 2002
Posts: 381
Likes: 0
From: Millersville,MD
Doc,
Check out: http://www.stumpysfabworks.zoomshare.com/
He uses top notch casters if you need them and he can make to order for you. He made me two sets extra wide and tall for oil pan clearance and add tie down points. Straight up guy
Check out: http://www.stumpysfabworks.zoomshare.com/
He uses top notch casters if you need them and he can make to order for you. He made me two sets extra wide and tall for oil pan clearance and add tie down points. Straight up guy
