Does anybody know,
if MEFI4-A support
J1939 Diagnostics and Service Tool
interface ?

For MEFI4-B I found following
http://web.archive.org/web/200511010...marine_EFI.pdf

Bad Influence

...any ideas to connect my Northstar M84 Multifunction Chartplotter to the MEFI ??

Thx
BI

The MEFI 4A does not support J1939, only the 4B does. That is the primary difference between the 2 controllers. I'm using a MEFI 4B with the J1939 CAN interface enabled right now. We have developed a J1939 software and hardware package in recent months and are rolling it into heavy vehicle fleets now. The detail and sheer volume of parameters you can get from a J1939 interface is amazing. Examples of a few parameter plots output by our software are at http://www.j1939logger.com/

MEFIburn,
thank you.

Do you also know if I can replace 4-A by 4-B ??

Thx
BI

The file needs to be converted, then a few tables needs to be updated, modified, so in general, yes, it can be replaced, but the calibrator has to do it.

Dustin

thx for your assistance !

BI

Marcus(Bad Influence), I just recieved your e-mail, and you have a reply in your box. Call me if you need more info

Thanks

Gary

Thanks Gary,

will get in touch with you

Marcus