Rev limitors on 575 sci's
07-08-2008 | 03:15 PM
#1
Thread Starter
Registered
Joined: Jan 2007
Posts: 25
Likes: 0
From: West Islip,NY
Rev limitors on 575 sci's
Is it bad for the motors if at WOT (5300rpm) the limitors trigger? I was trying to trim the boat to get maximum performance. What are the short/long term effects to the motors?
Thanks for your help.
Thanks for your help.
07-08-2008 | 04:58 PM
#2
VIP Member
Joined: Nov 2002
Posts: 4,176
Likes: 333
From: ankeny,ia.
See post # 5
http://www.offshoreonly.com/forums/s...+limiter+mefi3
Once you hit the limiter you've hit the wall anyway.
The governor has kicked in.....you're not going
to go any faster.
http://www.offshoreonly.com/forums/s...+limiter+mefi3
Once you hit the limiter you've hit the wall anyway.
The governor has kicked in.....you're not going
to go any faster.
