I have two sets of tall Gil Risers that won't fit under my hatch, to that end, I'm looking to sell or trade the tall Risers for 2 pairs of short Risers.

The measurement from bottom of the Riser flange to the top of the Riser is appx. 9 1/2 inches. (the short Riser is 3 inches shorter.)

(Alternatively, I need to know if another brand of riser will bolt on the manifold.)

All advice is appreciated!

I have Hardin Marine risers on my Gil manifolds.

I have a one set of gill short on the manifold side, standard height on the transom for a bravo available. I'm located in NY

I have a set as well. Will take a measurement to see if this is what you need.

Stainless Marine also sells a set that will fit on the Gils .. check their website.

great lakes skipper on ebay has some. aka as Kendor marine surplus franklin,wisc.

These are what I have. Let me know if this is what you are looking for.

Working from home today, so I just took these this afternoon. The white you see on the insides is dust. Last ones.

Damndonzi, What's the measurement from the bottom of the flange to the top of the riser?

Thanks for the input.

In the short term, I plan to sell the Gil risers and 2 pair of Stellings take-offs that are collecting dust.