16 foot donzi project
08-22-2008 | 03:18 PM
#1
Thread Starter
Registered
Joined: May 2006
Posts: 244
Likes: 0
From: huntington ny
16 foot donzi project
I am sanding the bottom in preperation for gel coating. My question to you all is this. What surface prep is recomended
for proper adhesion of the gel coat. Do I need to sand down to the glass or 80 until I have clean gel? Thanks In advance
Cort
for proper adhesion of the gel coat. Do I need to sand down to the glass or 80 until I have clean gel? Thanks In advance
Cort
08-23-2008 | 08:52 AM
#2
Neno the mind boggler
Joined: Sep 2001
Posts: 13,080
Likes: 320
From: toledo oh
yep sand everything down to about 80 or 120 grit and make sure it is all gel and no paint.
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
