Miscellaneous Valve Train Parts, cams and pistons….
08-28-2008 | 09:02 AM
#1
Thread Starter
Registered
Joined: Mar 2002
Posts: 1,546
Likes: 4
From: Layton, Utah
Miscellaneous Valve Train Parts, cams and pistons….
(2) full sets of Crane Gold 1.7 Rockers. Bodies are older but fulcrums and wheels look perfect. Look to have been rebuilt.$175 for both sets.
All of the following have less than 30 hours…
(2) CompCams solid roller billet cams… virtually perfect. Grind 300-5/308-5R12 (264/272 at .050 112 LSA .714/.714) Serial #J2347 cards available.
$250 for the pair.
(2) full set of CompCams solid roller lifters… Less than 30 hours; all measure .8412-.8414 even over the very slight wear/witness marks. $300 for both sets.
(2) sets, matching CompCams .080 push rods $50
(2) sets of springs Compcams 943-16… Less than 30 hours. $150 for both sets.. Includes locators
(2) sets of Ferrea 2.250 intake valves +.250 $75 for all 16
A set (8) of SRP pistons w/pins “212148” 4.530/1.395 CH / small 17cc dome $150
Addition pictures by request…
Make an offer
Thanks,
Dave
All of the following have less than 30 hours…
(2) CompCams solid roller billet cams… virtually perfect. Grind 300-5/308-5R12 (264/272 at .050 112 LSA .714/.714) Serial #J2347 cards available.
$250 for the pair.
(2) full set of CompCams solid roller lifters… Less than 30 hours; all measure .8412-.8414 even over the very slight wear/witness marks. $300 for both sets.
(2) sets, matching CompCams .080 push rods $50
(2) sets of springs Compcams 943-16… Less than 30 hours. $150 for both sets.. Includes locators
(2) sets of Ferrea 2.250 intake valves +.250 $75 for all 16
A set (8) of SRP pistons w/pins “212148” 4.530/1.395 CH / small 17cc dome $150
Addition pictures by request…
Make an offer
Thanks,
Dave
Last edited by Nordicflame; 08-28-2008 at 10:23 AM.
