Quicksilver Digital Diagnostic Terminal
10-01-2008 | 06:09 PM
#1
Thread Starter
I hate the winter!!
Joined: Jul 2001
Posts: 2,707
Likes: 0
From: long island, new york
Quicksilver Digital Diagnostic Terminal
I have a Quicksilver Digital Diagnostic Terminal. My cartridge or module is outdated. I tried to hook my scanner up to a 2002 575 SCI without success. I could not get it to communicate with the ECU. I bought the cartridge in 2000 or maybe 2001. At the time, it was supposed to be the latest software version. The only marking on the cartridge is V2 '98. Does anyone know what the part # is for the latest software? I need it to communicate with these '02 575 SCI's .
BTW... Is there a way to put the ECU into base timing mode without a scanner? I seem to remember there is a way to jump out the plug that the scanner plugs into.
BTW... Is there a way to put the ECU into base timing mode without a scanner? I seem to remember there is a way to jump out the plug that the scanner plugs into.
10-01-2008 | 06:44 PM
#2
Registered
Joined: Jan 2005
Posts: 573
Likes: 1
From: Newport Beach,CA
