Alum. Heads
10-14-2008 | 07:52 PM
#1
Thread Starter
Registered
Joined: Nov 2001
Posts: 424
Likes: 3
From: East Coast
Alum. Heads
Is there any problems with bolting on alum heads to a gen 6 block. The water passages on the block are traingular shaped, and the heads have round passages. Could this cause a problem?
10-14-2008 | 09:04 PM
#2
Charter Member # 55
Joined: Oct 2000
Posts: 20,232
Likes: 2,482
From: Omaha/LOTO
