Update !!!!
12-05-2008 | 01:00 PM
#1
Thread Starter
Registered
Joined: May 2006
Posts: 793
Likes: 1
From: In a box, s. side of chi town
Update !!!!
Alright I just got back from Nabers and we have a mold starting. Not mold on it since it has been sitting there so long but an Actual mold of the hull. He said he should have the rest of it on by the end of next week and then start the frame to support it.
I just need him to do a few other things before I bring it to the shop and start to rig it . I hope to have it by the middle of January .
On top of that, dad pulled the trigger and bought all of the #4 stuff from Brad. So now i don't have to worry about him stealing it of my Fountain when I 'm not around. So this means i have a bunch of TRS stuff that needs to go. 4 drives , 3 fresh gimbles, 2 inner gimbles, trim rams, Trim Tabs, And 2 Huber 1050 plug in transmissions. all have under 30 hours an them
I just need him to do a few other things before I bring it to the shop and start to rig it . I hope to have it by the middle of January .
On top of that, dad pulled the trigger and bought all of the #4 stuff from Brad. So now i don't have to worry about him stealing it of my Fountain when I 'm not around. So this means i have a bunch of TRS stuff that needs to go. 4 drives , 3 fresh gimbles, 2 inner gimbles, trim rams, Trim Tabs, And 2 Huber 1050 plug in transmissions. all have under 30 hours an them
12-05-2008 | 01:39 PM
#4
Registered
Joined: Jun 2006
Posts: 14,914
Likes: 1
From: Lake Conroe, TX.
Alright I just got back from Nabers and we have a mold starting. Not mold on it since it has been sitting there so long but an Actual mold of the hull. He said he should have the rest of it on by the end of next week and then start the frame to support it.
I just need him to do a few other things before I bring it to the shop and start to rig it . I hope to have it by the middle of January .
On top of that, dad pulled the trigger and bought all of the #4 stuff from Brad. So now i don't have to worry about him stealing it of my Fountain when I 'm not around. So this means i have a bunch of TRS stuff that needs to go. 4 drives , 3 fresh gimbles, 2 inner gimbles, trim rams, Trim Tabs, And 2 Huber 1050 plug in transmissions. all have under 30 hours an them
I just need him to do a few other things before I bring it to the shop and start to rig it . I hope to have it by the middle of January .
On top of that, dad pulled the trigger and bought all of the #4 stuff from Brad. So now i don't have to worry about him stealing it of my Fountain when I 'm not around. So this means i have a bunch of TRS stuff that needs to go. 4 drives , 3 fresh gimbles, 2 inner gimbles, trim rams, Trim Tabs, And 2 Huber 1050 plug in transmissions. all have under 30 hours an them
What we can't PM you anymore?
12-05-2008 | 02:15 PM
#5
Thread Starter
Registered
Joined: May 2006
Posts: 793
Likes: 1
From: In a box, s. side of chi town
12-05-2008 | 03:29 PM
#6
Registered
Joined: Aug 2007
Posts: 332
Likes: 0
From: Crestwood, IL
C O O L !
Alright I just got back from Nabers and we have a mold starting. Not mold on it since it has been sitting there so long but an Actual mold of the hull. He said he should have the rest of it on by the end of next week and then start the frame to support it.
I just need him to do a few other things before I bring it to the shop and start to rig it . I hope to have it by the middle of January .
On top of that, dad pulled the trigger and bought all of the #4 stuff from Brad. So now i don't have to worry about him stealing it of my Fountain when I 'm not around. So this means i have a bunch of TRS stuff that needs to go. 4 drives , 3 fresh gimbles, 2 inner gimbles, trim rams, Trim Tabs, And 2 Huber 1050 plug in transmissions. all have under 30 hours an them
I just need him to do a few other things before I bring it to the shop and start to rig it . I hope to have it by the middle of January .
On top of that, dad pulled the trigger and bought all of the #4 stuff from Brad. So now i don't have to worry about him stealing it of my Fountain when I 'm not around. So this means i have a bunch of TRS stuff that needs to go. 4 drives , 3 fresh gimbles, 2 inner gimbles, trim rams, Trim Tabs, And 2 Huber 1050 plug in transmissions. all have under 30 hours an them
