Mk. IV Big Block Chevrolet 496CI Stroker Long Blocks
01-19-2009 | 10:47 AM
#1
Thread Starter
Registered
Joined: Jun 2004
Posts: 761
Likes: 1
From: Palm City, Florida
Mk. IV Big Block Chevrolet 496CI Stroker Long Blocks
One pair of Mark IV Chevy big block stroker long blocks. Began life as 4-bolt main 454/400 Cyclones. Bored .060" over and stroked .250" to make 496 cubic inches. Scat 4340 forged stroker cranks and H-beam connecting rods, JE/SRP forged pistons small dome pistons making 10:1 compression, GM 990 large rectangular port heads have been pocket ported and larger Manley valves installed, Comp Cams Xtreme Marine camshaft kits with roller timing sets, Comp roller rockers, Milodon large offshore pans, Merlin Marine intakes, Clevite 77 bearings, Durabond cam bearings, Fel-Pro gasket sets, ARP bolt sets, only the best of the best was used in these.
0 hours, never fired. Asking $8750 per motor or $15,000 for the pair. Located in South Florida.
E-mail me for pics and build sheets at [email protected] if you're interested.
Thanks,
Harry
0 hours, never fired. Asking $8750 per motor or $15,000 for the pair. Located in South Florida.
E-mail me for pics and build sheets at [email protected] if you're interested.
Thanks,
Harry
Thread
Thread Starter
Forum
Replies
Last Post
Rockfish71
General Q & A
4
05-29-2008 01:39 PM
chrisf
General Boating Discussion
8
01-13-2006 04:44 PM
Dregsz
General Q & A
0
06-25-2005 12:26 AM
