http://www.247liquidators.com/boat/engine.html - $10.5K / offer

I bought this from the original owner who invested $24,000.00 to have it custom built.
He pulled it and re-powered with standard Mercury power when he sold his boat.
The engine is sitting on an engine stand in an inside storage facility here in Dallas .

No accessories included with the motor other than the crossover.

Specs:

632" Merlin II Block
4340 Callies 4.75" stroker
6.70" Oliver Rods
4.60" JE flat top pistons
10qt Dooley pan
Dart 360 heads fully ported and polished
flow 308 exhaust and 422 intake @.700 lift. 2.30" intake valves 1.88 Inconel exhaust valves
Jesel Shaft rockers 1.7
Schubeck "radius" lifters 276/[email protected] .730"lift 115 CL 1" radius cam
Dart Tunnel Ram
2X775 RS Race Demon TR carbs (flow 980)
10.5:1 CR
93 Octane motor with never a sign of detonation
Motor idles @850rpm and dyno's 900HP @6500
820ft/# @5100
Broad flat curve's. Bottom end good for 8200 rpm
Aluminum Flywheel
CSI starter
system1 oil filter
Keith Eickert 2 piece valve covers

Bob - 469-671-6199

typo

Bob, I sent you an email this morning about a different item!
thanks,
Dan Swanson