Fountain/Whipple question
03-15-2002 | 03:37 PM
#1
Thread Starter
Registered
Joined: Jan 2002
Posts: 468
Likes: 0
From: McHenry, IL
Fountain/Whipple question
Does anyone have experience with a 502 MPI/27' Fountain/Whipple application? What is the best way to alter the rear seat bulkhead for belt and pulley clearance. Pics would be appreciated.
03-15-2002 | 06:03 PM
#3
Ginger or Mary Ann?
Joined: Oct 2000
Posts: 11,030
Likes: 9
From: L
Heres mine. Picture isn't very good, appears pee yellow for some reason.
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Last edited by US1 Fountain; 12-02-2011 at 11:19 AM.
03-15-2002 | 06:05 PM
#4
Ginger or Mary Ann?
Joined: Oct 2000
Posts: 11,030
Likes: 9
From: L
And another..........
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Last edited by US1 Fountain; 12-02-2011 at 11:19 AM.
03-15-2002 | 07:42 PM
#5
Thread Starter
Registered
Joined: Jan 2002
Posts: 468
Likes: 0
From: McHenry, IL
Thanks US1. I've enquired with Whipple and they say that I'll need to cut out a triangular area with approx. 1 1/2 " radiused corners. These will go entirely through the fiberglass. I was hoping I could just router out an area similar to yours. If I could just get a CAD file from Whipple and Fountain and see where exactly the interference exists..... I don't think they do things that way in this industry!
