External steering on a 260
#2
Registered
Joined: Aug 2005
Posts: 777
Likes: 0
From: Marietta, Ga.
Check out Everette Performance. They are the dist. that Velocity gets there steering from. They would surely know all the pieces that you need. If it was mine, I would just do the full hydraulic.......... Good Luck!
http://www.everettperformance.com/
http://www.everettperformance.com/
#3
Registered
Joined: Jul 2006
Posts: 477
Likes: 0
From: Virginia
Check out Everette Performance. They are the dist. that Velocity gets there steering from. They would surely know all the pieces that you need. If it was mine, I would just do the full hydraulic.......... Good Luck!
http://www.everettperformance.com/
http://www.everettperformance.com/
I bought their dual ram full hydraulic system for my last velocity (which was a 260) and the customer service and craftsmanship was top notch. I purchased my system through Gellner Engineering (Mrhorsepower1 on OSO). I would highly recommend both companies to anyone.
#4
Thread Starter
Registered

Joined: Jan 2008
Posts: 221
Likes: 0
From: LAMARQUE TX
I think I am going to buy the mayfair full hydraluic single ram but was wanting to know which mounting location is better the 17 3/4 from side of gimbal or the 13 from side of gimbal?
Thread
Thread Starter
Forum
Replies
Last Post
SmallPP
General Q & A
1
08-07-2007 09:23 PM




