Parting out 46 Larry Smith Scarab parts
02-27-2009 | 11:45 PM
#1
Thread Starter
VIP Member
Joined: Feb 2009
Posts: 46
Likes: 15
From: Saint Charles, Iowa
Parting out 46 Larry Smith Scarab parts
PARTS SOLD
Complete set up to rig triple engine boat. complete #4 drives for outside engines, and 3a for center. Driveshaft assembly with transom plate and carrier bearing for center engine, 380s k planes, all trim pumps, complete hydraulic steering, throttle/shifter controls, stellings large tube stainless exhaust less mufflers,4 Gil sea strainers, B&M 2 speed transmissions, 3 lab finished 4 blade propsswim platform, two hatch lift cylinders. Off of a 46 Larry Smith Scarab with only 100 hours on boat. Will part out or sell as complete lot.
e mail me if you're interested!
[email protected]
Complete set up to rig triple engine boat. complete #4 drives for outside engines, and 3a for center. Driveshaft assembly with transom plate and carrier bearing for center engine, 380s k planes, all trim pumps, complete hydraulic steering, throttle/shifter controls, stellings large tube stainless exhaust less mufflers,4 Gil sea strainers, B&M 2 speed transmissions, 3 lab finished 4 blade propsswim platform, two hatch lift cylinders. Off of a 46 Larry Smith Scarab with only 100 hours on boat. Will part out or sell as complete lot.
e mail me if you're interested!
[email protected]
Last edited by FiberglassArt; 03-01-2009 at 08:35 PM.
03-01-2009 | 08:35 PM
#3
Thread Starter
VIP Member
Joined: Feb 2009
Posts: 46
Likes: 15
From: Saint Charles, Iowa
I've had the boat since 2001 and have always intended on updating it and putting it on Lake of the Ozarks. Recently I have been introduced to offshore sport fishing, and we really enjoyed fishing on the ocean. So being in the fiberglass boat repair business my whole life, I have the capabilities to turn it into a really nice, solid, fast offshore fishing rig with quad outboards. You can check out my website at http://iowaboatrepair.com/. And actually the parts have been sold as of today.
