Canton Oil Pan for 27 Fountain
03-27-2009 | 02:50 PM
#1
Thread Starter
Registered
Joined: May 2007
Posts: 1,272
Likes: 0
From: Georgetown, TX
Canton Oil Pan for 27 Fountain
Has anyone changed from a stock GM (Mark V) to Canton pan in this boat? I'm looking to upgrade my oiling system and have some concerns on what fits, and what doesn't. Specifically, Canton part #s 18-382 or 18-362. Boat has race engine mount.
The 382 is 10" deep and I'm concerned with clearance on the middle stringer and the ability to continue to route my water hoses underneath. I would have to relocate the bilge pump at minimum for this pan, which is not a big deal.
The 326 is 8.5" deep and has a kickout for the extra capacity. To me, this is the logical choice at first glance.
Canton18-362
Canton 18-382
Anyone?
The 382 is 10" deep and I'm concerned with clearance on the middle stringer and the ability to continue to route my water hoses underneath. I would have to relocate the bilge pump at minimum for this pan, which is not a big deal.
The 326 is 8.5" deep and has a kickout for the extra capacity. To me, this is the logical choice at first glance.
Canton18-362
Canton 18-382
Anyone?
Thread
Thread Starter
Forum
Replies
Last Post
powerquest280
Do It Yourself, Boating on a Budget
21
01-18-2010 02:14 PM
KennyOffShore
Offshoreonly Industry News
0
08-08-2008 12:38 PM
