Max Machine ,,b&m420 Hydro Motives
05-13-2009 | 10:09 PM
#1
Thread Starter
Registered
Joined: May 2009
Posts: 105
Likes: 0
Max Machine ,,b&m420 Hydro Motives
#1
ANDYLOHR
Junior Member
Join Date: May 2009
Posts: 13 Parts for Sale
--------------------------------------------------------------------------------
420 mega blower with 4 pulleys all linkage , eddie marine billet 1 peice filter , , fuel line kit , and 2 nickerson 850 holleys , setup works perfect , i ran in on a hp500 for years 3000.00
2 new aed boost ref holley 850s new in the box 850.00 for both
msd billet dist with wires and cap for bbc 250.00
2 msd 6m-2 cotrol boxes ready too use 225.00 each
2 props hydomotive 28p5x like new 600.00 labbed
1 hydromotive 28 labbed 4 blade dominator with welded hub for standard bravoe shaft 450.00
1 standard bravoe lower with bobs nose con, complete , upper shaft has slight twist but usable 1200.00
eddie marine seastainer 175.00
imco polished standard length lower case ready for internals 1200.00
max machine billet lower new never used 2 in shortie with 1 in spacer kit , all max internals 1.35 ratio 4500.00
2 blower fuel logs complete 1 has gauge 100.00 each
various water routing and thermo necks make offer
pics r below any interest call andy lohr 540 895 9771 or 434 284 0485
--------------------------------------------------------------------------------
ANDYLOHR
Junior Member
Join Date: May 2009
Posts: 13 Parts for Sale
--------------------------------------------------------------------------------
420 mega blower with 4 pulleys all linkage , eddie marine billet 1 peice filter , , fuel line kit , and 2 nickerson 850 holleys , setup works perfect , i ran in on a hp500 for years 3000.00
2 new aed boost ref holley 850s new in the box 850.00 for both
msd billet dist with wires and cap for bbc 250.00
2 msd 6m-2 cotrol boxes ready too use 225.00 each
2 props hydomotive 28p5x like new 600.00 labbed
1 hydromotive 28 labbed 4 blade dominator with welded hub for standard bravoe shaft 450.00
1 standard bravoe lower with bobs nose con, complete , upper shaft has slight twist but usable 1200.00
eddie marine seastainer 175.00
imco polished standard length lower case ready for internals 1200.00
max machine billet lower new never used 2 in shortie with 1 in spacer kit , all max internals 1.35 ratio 4500.00
2 blower fuel logs complete 1 has gauge 100.00 each
various water routing and thermo necks make offer
pics r below any interest call andy lohr 540 895 9771 or 434 284 0485
--------------------------------------------------------------------------------
05-13-2009 | 10:10 PM
#2
Thread Starter
Registered
Joined: May 2009
Posts: 105
Likes: 0
05-14-2009 | 02:13 PM
#3
Registered
Joined: May 2005
Posts: 30
Likes: 0
05-14-2009 | 05:28 PM
#4
Registered
Joined: May 2004
Posts: 456
Likes: 0
From: Monroe, MI
05-14-2009 | 07:43 PM
#5
Thread Starter
Registered
Joined: May 2009
Posts: 105
Likes: 0
05-14-2009 | 09:54 PM
#7
RIPSTA Racing Team
Joined: Nov 2008
Posts: 2,093
Likes: 1
From: Philadelphia, PA
05-15-2009 | 08:37 AM
#8
Registered
Joined: May 2004
Posts: 456
Likes: 0
From: Monroe, MI
Send me a pic of the strainer, [email protected] I can't access that site. Why not post pics here?
