Anyone have any prints of the tools needed for putting a lower together. Mostly looking for the plug the goes in the bullet for setting the pinon depth.


name is Shimming tool. Part # 91-42840

I am not sure this is going to work or open up, But hear is a link to some mercruiser service manuals that I think will open up for you to find what you need, I say that becouse I thought I opened it up a few days a go But it would not open today so I don't know any more, Good luck with it if you want to mess with.

http://forums.iboats.com/showthread.php?t=251571

I have the tool but I don't know where you could find prints. I could take a pic for you.

You may find it in the bravo service manual but sometimes they only list part numbers with no pics. There are some random pattern/shape type pics in the manual.

The manuals only give part #'s. Can you make a sketch with dementions on it? That would be great if you could.
Mike

The tool is only $125 or so. I take it you want to build your own?

I have a source for bravo tools. Email me at [email protected]

Kirk

I hava a mercruiser "special tool" manual that I can scan and email it to you if you want. Just letme know. I will need you email adress though..

Thanks guys. I have a lathe and want to make my own. Just trying to save a few $$

[email protected]

I have no way of measuring this with enough accuracy to help you. Obviously the holes are for the feeler guages.

OD on the small disc is 2.450" and the larger disc is 4.285".. I will have to measure the distance between the two.. PM me for more info.
Dick