Looking for names and # for manufactures that build windshields
from a basic dementional drawings?? Thanks

try;

D&D Precision Plastics
3700 70th Ave North
St. Petersburg, FL 33781

727-527-2016 David is the owner

Try Ben Ellis at 407-644-2991 @ presision plastics, I amy be using him to make a white screen for my Fountain

Will

This may not apply to your needs but might help.

www.ccmi-reedco.com/ccmi/boat.html

Since you are on the left coast, you may try one of the oldest windshielf manufacturers who has supplied the So Cal boat market for years: Wayne-Earl in Tustin, CA (714) 666-2363
(Check the area code, it may have changed, but they are in Orange County). Give him your brand, year and size and he may have something he can do for you. Good luck...

After I contact them, I'll have to see if it falls in the budget for this years restoration or next. Thank you all again. Geo

I'm sure you can find a plastic shop locally that can bend up what you need, if you don't want curved just bends in it. I know there are a couple places in Tacoma + Seattle that can do it but you could probably find some one closer, check out the Yellow pages under Plastics I'm sure there has to be someone in Portland.
Later,
Caleb

I may -depending on the demensions- call me and let's talk- Al from Addictive Watersports at (813) 247-3049.

If you need something custom, we would help you out, if you need standard call Premier Windshields.
[email protected]