i have a 97 37 with a pair of 500's and was wondering it 250 b&m's would fit under the original flat hatch? if not, it there anyone out there that would like to swap a factory fiberglass scoop hatch for a factory upholstered hatch. (it's all white).

i have a 98 37 and i had 420 mega blowers and have the inserts in the standard hatch and the bolts on the carbs just hit

where did you get the inserts and how much. what size was your air cleaner? it looks like i can cut into the bottom of the hatch about 2 inches them it looks like antoher 2 inches of foam. from the bottom of the stock intake to the top of the air cleaner i have 15 inches with 1 inch to spare till i hit the hatch. the blower set up is 19 inches from bottom of intake to top of carb without air cleaners. just wondering how your 420's fit? it looks as if my set up will not work and your blower is even bigger.

sorry it been so long boat came like this it had merc 600 when new and they are side by side

still looking for a blower hatch for my 97 stilletto. i have a flat all white factory hatch in pristine condition to trade if anyone is interested. my b&m 250 superchargers wont fit under my factory hatch. 97 non staggered stilletto. any info would be appreciated!

i just wanna hit 100

Call me at 401-527-2627. I will see what is available, or we could get a price together to retro fit yours or build you a new one.

Fred

My costom hatch for my 900SC

outerlimits- will you be at the 1000 islands run again this year? i saw your boat there last year, looked good. i would like to check out your set up if possible. kevin

ya im gonna be there