What pulley is needed?
06-24-2009 | 07:17 AM
#1
Thread Starter
Registered
Joined: Oct 2005
Posts: 756
Likes: 1
From: New Hartford CT
What pulley is needed?
I am replacing the Mercury sea water pump on my 454/Bravo with a Jabsco pump.
The Jabsco pump has a flange with 4 mounting holes for the pulley. My stock sea water pump mounts with one nut directly on the shaft of the pump.
The Jabsco pump is the newer style that uses 4/5 nuts to hold the pump to the bracket, not the older "clamp" style.
What pulley do I need and where can I find one for this application with a serpentine belt?
Any help is appreciated.
Ken
The Jabsco pump has a flange with 4 mounting holes for the pulley. My stock sea water pump mounts with one nut directly on the shaft of the pump.
The Jabsco pump is the newer style that uses 4/5 nuts to hold the pump to the bracket, not the older "clamp" style.
What pulley do I need and where can I find one for this application with a serpentine belt?
Any help is appreciated.
Ken
