Go Back  Offshoreonly.com > Offshoreonly Marketplace > Swap Shop
2 New XR Uppers for Sale >

2 New XR Uppers for Sale

Notices

2 New XR Uppers for Sale

Thread Tools
 
Old 07-27-2009 | 07:40 PM
  #1  
thunderusone's Avatar
Thread Starter
Registered
 
Joined: Jul 2003
Posts: 2,159
Likes: 1
From: Mt Juliet, TN
Default 2 New XR Uppers for Sale

I have two Brand New never run XR uppers built with the best parts money can buy. I ran this combination on my other boat with ZERO failures behind 598 3.3 whipple motors. Stock XR's would last between 10 and 15 hours. These were backups before I bought the #6 boat. They have billet marine top caps and max machine upper veriticals. They were completely dissasembled, cleaned, deburred and re-clearanced/shimmed and re-assembled. They also have max machine trim blocks and stainless water pickups. If you need the imco steering caps on the back they are $4500 each....if you need a regular XR back cap they are $4250.00 each. Just the upper veriticals in these are over $700.00 each. I have more than what I am asking for them in parts alone. Email [email protected] if interested.

Thanks!
Attached Thumbnails 2 New XR Uppers for Sale-dsc03006-large-.jpg   2 New XR Uppers for Sale-dsc03005-large-.jpg   2 New XR Uppers for Sale-dsc02997-large-.jpg  

2 New XR Uppers for Sale-dsc02994-large-.jpg   2 New XR Uppers for Sale-dsc02996-large-.jpg  
thunderusone is offline  
Reply
Old 07-29-2009 | 12:04 AM
  #2  
thunderusone's Avatar
Thread Starter
Registered
 
Joined: Jul 2003
Posts: 2,159
Likes: 1
From: Mt Juliet, TN
Default

If anyone wants these...I can bring them to the Poker Run in Destin.
Attached Thumbnails 2 New XR Uppers for Sale-dsc03138-%5B1024x768%5D.jpg   2 New XR Uppers for Sale-dsc03139-%5B1024x768%5D.jpg   2 New XR Uppers for Sale-dsc02992-%5B1024x768%5D.jpg  

thunderusone is offline  
Reply
Old 07-29-2009 | 05:25 PM
  #3  
Registered
 
Joined: Jul 2008
Posts: 34
Likes: 0
Default

I talked to eddie today about your drives. I will be needing one of them. Would you make a little better deal for both?
We will not need steering caps.
Thanks
Justin
931-801-9236
jlowe is offline  
Reply
Old 08-01-2009 | 12:39 PM
  #4  
thunderusone's Avatar
Thread Starter
Registered
 
Joined: Jul 2003
Posts: 2,159
Likes: 1
From: Mt Juliet, TN
Default

One sold, I have one left. I have had alot of inquires on these....so if you want one you need to get this last one before it gets gone.

Thanks again Justin!
thunderusone is offline  
Reply
Old 08-01-2009 | 03:51 PM
  #5  
fastlane40's Avatar
Platinum Member
20 Year Member
Platinum Member
 
Joined: Oct 2003
Posts: 788
Likes: 0
From: Townsville Australia
Default

Just emailed you.I'll take it.
fastlane40 is offline  
Reply
Old 08-01-2009 | 05:41 PM
  #6  
thunderusone's Avatar
Thread Starter
Registered
 
Joined: Jul 2003
Posts: 2,159
Likes: 1
From: Mt Juliet, TN
Default

I'm boxing it up now.
thunderusone is offline  
Reply
Old 08-02-2009 | 12:34 PM
  #7  
thunderusone's Avatar
Thread Starter
Registered
 
Joined: Jul 2003
Posts: 2,159
Likes: 1
From: Mt Juliet, TN
Default

Email sent on the shipping.
thunderusone is offline  
Reply
Old 08-02-2009 | 09:06 PM
  #8  
Registered
 
Joined: Jul 2008
Posts: 34
Likes: 0
Default

Thanks John!!
It was good to meet you Sat.
How did your prop test turn out?
Justin
jlowe is offline  
Reply
Old 08-03-2009 | 08:41 AM
  #9  
thunderusone's Avatar
Thread Starter
Registered
 
Joined: Jul 2003
Posts: 2,159
Likes: 1
From: Mt Juliet, TN
Default

Originally Posted by jlowe
Thanks John!!
It was good to meet you Sat.
How did your prop test turn out?
Justin
Went straight to the rev limiter at 6200 at 112 mph. They are tool small. I just listed them here in the swap when we got back. You should have stayed...we went to the water as soon as you pulled out of the driveway.
thunderusone is offline  
Reply
Old 08-04-2009 | 04:00 PM
  #10  
Registered
 
Joined: Jul 2008
Posts: 34
Likes: 0
Default

I'm sorry I missed that. Maybe I'll get to take a ride in that thing one day. I bet its great.
Justin
jlowe is offline  
Reply


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.