So we were out running yesterday and I wasnt exactly "Easy" on it, but it ran fine all day. Left lunch, going along at 30, cuz I had a few, 2 miles from the ramp it let go If I shift it without it running prop locks in gear, but when it is running it doesnt spin in gear, checked the splines on the crank seem OK. I removed the lower today and it seems like if I put it in gear, and spin the input shaft, it spins but I get nothing out of the propshaft, but yet, cant spin the propshaft at all when its in gear. I know it needs a propshaft, cuz the previous owner hit something and the splines are slightly twisted. To top it all off, now is a bad time $$wise. Who do ya know that can do a good job for the right $$ down here?? Also, if someone has a used propshaft that might help.

Thanks,

Rick

Diamond Marine Ft Lauderdale

you sure its not a prop hub Rick ?

Diamond Marine All The way!!! Marty and Joe are the best !
954-525-2600

Rick
The drive shop at TNT or offshore outdrives located in Grants custom rigging

Mark,

its beyond that. Also, didnt hit anything, just like to run it hard(ask X-Ray50, and TZ Rider), and it had some previous damage to the propshaft, so probably something that was injured, but not broken completely from when the last guy hit something.

Rick

Thanks Paul.

Any idea what the average cost is on these things? I have NEVER blown a drive before

Rick

Hey...Brian from offshore outdrives.com is the man..Great guy to deal with, hes done excellent work on my drive and many buddies...you can reach him at 954 448 4478

That sucks Rick.

If you need a quote for comparison, I'll get with my guy up here in MA.

Steve

Rick , if you don't mind shipping it we can get it done . Tom