Notices
General Boating Discussion

Rooster Tail

Thread Tools
 
Old 11-24-2009 | 05:18 PM
  #1  
Thread Starter
Registered
 
Joined: Jul 2004
Posts: 112
Likes: 0
Default Rooster Tail

Is there a way to throw a nice rooster tail without staggered engine setup. I have a 35 Fountain non staggered set up but can't get rooster even with aggressive drive settings ??????? Is there something that needs added to the drives.... Speed
speedchangesyou is offline  
Reply
Old 11-24-2009 | 05:26 PM
  #2  
glassdave's Avatar
Neno the mind boggler
20 Year Member
Super Moderators
 
Joined: Sep 2001
Posts: 13,080
Likes: 320
From: toledo oh
Default

somewhere in the Cig section there was a guy that had some kinda diverter that attached to the cavitation plate, threw up a spray but not a big tail. The only way to get it is high X dimensions and stagger. Over trimming a drive to achieve a tail could do some damage.
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
glassdave is offline  
Reply
Old 11-24-2009 | 05:28 PM
  #3  
Registered
15 Year Member
 
Joined: Jul 2009
Posts: 1,407
Likes: 3
From: Bay City, MI
Default

i dont think it has much to do with stagger, more about depth props running at, prop style and pitch, amount of water props are pushing-more hp=more prop=more water in motion. surface drives throw bigger roost cause the blade is above the water on part of its revolution and throws water off the blade into the air. the real experts can step in here anytime
hotjava66 is offline  
Reply
Old 11-24-2009 | 05:29 PM
  #4  
LapseofReason's Avatar
Registered
 
Joined: Jan 2003
Posts: 2,806
Likes: 0
From: Stafford Va.
Default

You dont need a stag. set up for a rooster tail, you need surface drives. You could raise the X dim of you drives or put two inch shortys on but then you risk messing up the way the boat drives just for that look and it's still not going to put out a big tail.. My boat had tripps and #5 drives and would put about a 50 foot high 120 foot long tail out but that is the way it was set up not just for looks. I recomend buying a boat with surface drives if that is what you want.
LapseofReason is offline  
Reply
Old 11-24-2009 | 05:31 PM
  #5  
38KV's Avatar
Platinum Member
20 Year Member
Platinum Member
 
Joined: Nov 2003
Posts: 528
Likes: 0
From: Stockholm, Sweden
Default

I think it depends on the drives and props more than if you have staggered or not.

I have a 38' with side by side SSM#6's, and I throw a 200 ft rooster tail WIHTOUT aggressive trim.

[YOUTUBE]http://www.youtube.com/watch?v=G1zIUHegu2o[/YOUTUBE]
38KV is offline  
Reply
Old 11-24-2009 | 05:48 PM
  #6  
t500hps's Avatar
21 and 42 footers
20 Year Member
Platinum Member
Super Moderators
 
Joined: Sep 2004
Posts: 8,207
Likes: 146
From: Richmond VA
Default

I added a bunch of cup to a set of 32 Bravo's trying to achieve better cruise speeds. It worked but it also created a "tail" effect. Threw about a 6 ft tall tail but was hard to determine how far back if went (depends on speed I guess). Looked pretty cool but I found a set of Maximus that gave me even better cruise speeds so I use them instead.




BTW: Those 32P props are for sale
t500hps is offline  
Reply
Old 11-24-2009 | 05:50 PM
  #7  
GLH's Avatar
GLH
Platinum Member
20 Year Member
Platinum Member
 
Joined: Dec 2002
Posts: 15,270
Likes: 21
From: Burlington, VT
Default

Get #6 drives....
GLH is offline  
Reply
Old 11-24-2009 | 06:19 PM
  #8  
Registered
20 Year Member
 
Joined: Apr 2005
Posts: 2,997
Likes: 127
From: Lees Summit ~ LOTO 10MM
Default

Found this while searching the forums. dunno if it works good or not.
Attached Thumbnails Rooster Tail-dscn1466.jpg  
endeavor1 is offline  
Reply
Old 11-24-2009 | 06:32 PM
  #9  
Registered
 
Joined: Sep 2008
Posts: 306
Likes: 0
From: Lubbock, TX
Default

Buy this!!

http://www.youtube.com/watch?v=KUX347RsFGg

I dont get the rooster tail obsession, but this one beats them all.
tx911 is offline  
Reply
Old 11-24-2009 | 07:35 PM
  #10  
Rik's Avatar
Rik
arneson-industries.com
25 Year Member
Offshoreonly Advertiser
 
Joined: Jan 2001
Posts: 2,782
Likes: 7
From: California
Default

Arneson's

http://www.youtube.com/watch?v=bxjsIl3F3x8

http://s131.photobucket.com/albums/p...t=MVI_2281.flv
__________________
Arneson Surface Drives www.arneson-industries.com
Rik is offline  
Reply


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.