Looking at buying a set of K-planes and they are 19 1/2in long. The pic makes them look real short and the guy states they are the 280S model. Will these work on a 27ft boot and is 19 1/2in long about the correct length?
Erik

280's on a 26' rumrunner....they work as they should...perfectly!

Well I was over bidded on the 280S K planes. So iam back to searching for something. Should I look for longer ones like 20 plus inches? The boat should be able to hit mid 80's so i want to make sure I have the correct length tabs.
Thanks
Erik

in mercs book the 280s were made for boats up to 38ft, my bud has the 280s on a 46footer, the 380s I have are for boats with ex boxes or OBs with transom brackets, what did the 280s sell for.

So a 19 1/2in tab should be plenty for my boat is what your saying. The 280S K-planes ONLY, no pumps sold for close to $1200.
Erik

yes there Great I ran my boat one year with the bennet tabs WHAT A JOKE I replaced the the tab or piston at least once in the 1st yr, so I ordered a pair love them, I have the 380s cause of the ex box on the drive, I have a spare pair complete but will try and sell my old hull with the option of kplanes ,hyd steering, drive , hd gimbal, or sell the boat stripped with trailer for 3 or 4 grand. and if it goes the k planes 1500 with pumps and other stuff will go for 1000 to 1500, are you in a rush? art

280's are plenty for a 27' boat.

PM sent

Ok sounds good, thanks guys
Erik