milodon gen 4 oil pans
12-23-2009 | 09:56 AM
#1
Thread Starter
Registered
Joined: Dec 2000
Posts: 318
Likes: 0
From: west harrison IN United States of America
milodon gen 4 oil pans
2 new OFFSHORE pans with dyno time only. i have the pickup and dipstick
$500 each
Designed for multi-engined race boats, as well as, jet drive ski boats that require an under engine mounting cradle. Built from super heavy duty 16 gauge steel to withstand all types of severe racing conditions. Designed for ample bilge clearance, as well as 100% oil control. Has provision for oil temperature sender and uses a Milodon stainless steel CNC, watertight, screw-in dipstick. With most aluminum rods, pan will fit a 41/2" stroke without modification.
Pan Capacity is 12 Quarts Plus Filter -
5" in Front, 8 1/2" Deep in Rear Sump
$500 each
Designed for multi-engined race boats, as well as, jet drive ski boats that require an under engine mounting cradle. Built from super heavy duty 16 gauge steel to withstand all types of severe racing conditions. Designed for ample bilge clearance, as well as 100% oil control. Has provision for oil temperature sender and uses a Milodon stainless steel CNC, watertight, screw-in dipstick. With most aluminum rods, pan will fit a 41/2" stroke without modification.
Pan Capacity is 12 Quarts Plus Filter -
5" in Front, 8 1/2" Deep in Rear Sump
