Heads, Camshafts, Roller rockers, Valve covers
02-19-2010 | 11:06 PM
#1
Thread Starter
Registered
Joined: Oct 2008
Posts: 617
Likes: 0
From: Toms River, NJ
Heads, Camshafts, Roller rockers, Valve covers
Just trying to make some room.
Everything is located in Toms River, NJ 08755
Buyer can pick parts up here in Toms River or pay shipping. Price dosn't include shipping....
Please email me at [email protected]
Thanks
Erik
Two sets or Harland Sharp 1.7 ratio 7/16 stud roller rockers, complete with poly locks and low hours on rockers. Rocker have been slightly clearanced to clear stock valve covers. Will not affect performance of rockers. $100 per each set
Two camshafts from gen6 415hp 502cid MPI Magnum engines. Cams look like they have low hours on them since there is min wear on them. $75 EACH
Complete set of cylinder heads from a Gen6 415hp 502cid MPI Magnum engine. Look clean and ready to go.
$500 PLUS SHIPPING..HEAVY
Everything is located in Toms River, NJ 08755
Buyer can pick parts up here in Toms River or pay shipping. Price dosn't include shipping....
Please email me at [email protected]
Thanks
Erik
Two sets or Harland Sharp 1.7 ratio 7/16 stud roller rockers, complete with poly locks and low hours on rockers. Rocker have been slightly clearanced to clear stock valve covers. Will not affect performance of rockers. $100 per each set
Two camshafts from gen6 415hp 502cid MPI Magnum engines. Cams look like they have low hours on them since there is min wear on them. $75 EACH
Complete set of cylinder heads from a Gen6 415hp 502cid MPI Magnum engine. Look clean and ready to go.
$500 PLUS SHIPPING..HEAVY
Last edited by crapr6; 02-19-2010 at 11:18 PM.
02-19-2010 | 11:17 PM
#2
Thread Starter
Registered
Joined: Oct 2008
Posts: 617
Likes: 0
From: Toms River, NJ
Complete set of 14097088 Cylinder heads. Very rusty will need to be taking apart, cleaned up and will probably need valves laped in. $200 PLUS SHIPPING..HEAVY
Bare set of 14096188 Cylinder heads. Looks to have new exhaust seats installed will need to be cleaned up alittle bit. $200 PLUS SHIPPING..HEAVY
Bare set of 14096188 Cylinder heads. Looks to have new exhaust seats installed will need to be cleaned up alittle bit. $200 PLUS SHIPPING..HEAVY
02-19-2010 | 11:21 PM
#3
Registered
Joined: Feb 2009
Posts: 8,356
Likes: 1,515
From: NW Michigan
Can you hold the roller rockers until noon Saturday. Camandersander here on the board needs two sets and mine are not going to work out for him so I wanted to send him this link to see if he is interested in these.
Thanks,
John
Thanks,
John
02-19-2010 | 11:22 PM
#4
Thread Starter
Registered
Joined: Oct 2008
Posts: 617
Likes: 0
From: Toms River, NJ
Erik
Last edited by crapr6; 02-19-2010 at 11:30 PM.
02-19-2010 | 11:30 PM
#6
Thread Starter
Registered
Joined: Oct 2008
Posts: 617
Likes: 0
From: Toms River, NJ
Eagle H-Beam rods. 6.535 Length, 2.20 joural.
These where in a Dart tall deck 598cid via 4.5in crank and bore size of 4.600. 55hours of run time. $200
2 sets of stock valve covers from a 415hp 502cid MPI Magnum engine. $75 per each set.
These where in a Dart tall deck 598cid via 4.5in crank and bore size of 4.600. 55hours of run time. $200
2 sets of stock valve covers from a 415hp 502cid MPI Magnum engine. $75 per each set.
02-19-2010 | 11:33 PM
#8
Thread Starter
Registered
Joined: Oct 2008
Posts: 617
Likes: 0
From: Toms River, NJ
02-20-2010 | 12:02 AM
#9
Registered
Joined: Sep 2006
Posts: 1,391
Likes: 0
From: CapeComa,FL
Goofball sent me a message......
Thanks JR
I'll take em.....
Pls lemme know method of pmt. JR can tell ya, my munne be guud (use the BEST ink for printing....)
Rich Sander
2108 SE 19th lane
Cape Coral, FL
33990
239-349-5395
[email protected]
I guess that is enough.....unless u want my geneteic code...
Thanks JR
I'll take em.....
Pls lemme know method of pmt. JR can tell ya, my munne be guud (use the BEST ink for printing....)
Rich Sander
2108 SE 19th lane
Cape Coral, FL
33990
239-349-5395
[email protected]
I guess that is enough.....unless u want my geneteic code...
02-20-2010 | 12:20 AM
#10
Thread Starter
Registered
Joined: Oct 2008
Posts: 617
Likes: 0
From: Toms River, NJ
Goofball sent me a message......
Thanks JR
I'll take em.....
Pls lemme know method of pmt. JR can tell ya, my munne be guud (use the BEST ink for printing....)
Rich Sander
2108 SE 19th lane
Cape Coral, FL
33990
239-349-5395
[email protected]
I guess that is enough.....unless u want my geneteic code...
Thanks JR
I'll take em.....
Pls lemme know method of pmt. JR can tell ya, my munne be guud (use the BEST ink for printing....)
Rich Sander
2108 SE 19th lane
Cape Coral, FL
33990
239-349-5395
[email protected]
I guess that is enough.....unless u want my geneteic code...
I'll PM you..
Erik
