Advice How to build tunnel flap for 1000hp 30ft cat
03-02-2010 | 09:57 PM
#2
Registered
Joined: Oct 2004
Posts: 616
Likes: 1
From: Portland, OR
I could design you a flap, and have the parts, including hinges, waterjet cut. I could ship you the parts and you could take it to a welder of your choice for assembly, or I could have it welded by any number of fabricators around portland.
It would cost about $3 something a pound for the aluminum, plus some design fees and welding and powdercoating if you wanted that. If we made it out of 5083 or 5086 Aluminum, you wouldn't have to paint it if you didn't want to. Stainless is another option, but a bit more expensive.
Contact me if you are interested. We use ShipConstructor, which is the top-of-the line shipbuilding/lofting/nesting software.
Tullio Celano III P.E.
Crescere Marine Engineering, Inc.
Portland OR
503-366-2660
It would cost about $3 something a pound for the aluminum, plus some design fees and welding and powdercoating if you wanted that. If we made it out of 5083 or 5086 Aluminum, you wouldn't have to paint it if you didn't want to. Stainless is another option, but a bit more expensive.
Contact me if you are interested. We use ShipConstructor, which is the top-of-the line shipbuilding/lofting/nesting software.
Tullio Celano III P.E.
Crescere Marine Engineering, Inc.
Portland OR
503-366-2660
