Alpha drive by Konrad , less than 10 hours , $950 shipped
#1
Thread Starter
Registered

Joined: Nov 2003
Posts: 2,296
Likes: 3
From: Lake Travis ,Texas
Got a screaming deal on a complete Bravo setup so this drive has to go.
In the 90s Konrad made an Alpha compatible drive called the Konrad Omega,
this particular drive sat in storage till I bought it and have put less than 10 hours on it, is basically brand new. All shafts, splines,u joints etc look new like a ten hour drive should.
It did have some cavitation plate damage and general dings from being moved around
for so many years, I had Nettles Propellor here in Austin fix and paint the outside
to look new again. I will also throw in the drive shower since it wont fit the Bravo.
All internals can be swapped with Mercruiser parts if need be.
It is an Alpha 1 Gen 1 clone .
Drive is approx ten pounds heavier than a stock Alpha
Gears are 1.5 . Drive new sold for $5k
$950 including shipping anywhere in the 48 states.
It will be shipped in two boxes since it will be much easier to ship that way.
[email protected]
picture of drive before painting:
http://damncarrera.com/konradomega.jpg
In the 90s Konrad made an Alpha compatible drive called the Konrad Omega,
this particular drive sat in storage till I bought it and have put less than 10 hours on it, is basically brand new. All shafts, splines,u joints etc look new like a ten hour drive should.
It did have some cavitation plate damage and general dings from being moved around
for so many years, I had Nettles Propellor here in Austin fix and paint the outside
to look new again. I will also throw in the drive shower since it wont fit the Bravo.
All internals can be swapped with Mercruiser parts if need be.
It is an Alpha 1 Gen 1 clone .
Drive is approx ten pounds heavier than a stock Alpha
Gears are 1.5 . Drive new sold for $5k
$950 including shipping anywhere in the 48 states.
It will be shipped in two boxes since it will be much easier to ship that way.
[email protected]
picture of drive before painting:
http://damncarrera.com/konradomega.jpg
Last edited by HTRDLNCN; 03-10-2010 at 02:59 PM.



