Sea Pump Nose Housing Rebuild
03-10-2010 | 06:59 PM
#1
Thread Starter
Registered
Joined: Sep 2005
Posts: 153
Likes: 0
From: O'Fallon, MO
Sea Pump Nose Housing Rebuild
Does anyone have the shop manual page or instruction or tips on how to rebuild the sea pump nose housing? I notice grease was leaking out behind the pulley so I pulled it off to rebuild. I plan on replacing both bearings, seals, and retaining ring.
Thanks in advance,
Mike
Thanks in advance,
Mike
03-10-2010 | 07:37 PM
#3
Registered
Joined: Dec 2007
Posts: 784
Likes: 0
From: Detroit River/ lake Erie
03-10-2010 | 08:51 PM
#5
Registered
Joined: Mar 2006
Posts: 69
Likes: 0
From: Milwaukee, WI
I was told by the Merc dealers they are not serviceable.
But that didnt stop me. I found all for the parts at Bearings inc.
I have a fresh one on the shelf.
any questions you could call me at 414-581-4300
Jeff
But that didnt stop me. I found all for the parts at Bearings inc.
I have a fresh one on the shelf.
any questions you could call me at 414-581-4300
Jeff
03-10-2010 | 08:57 PM
#6
Registered
Joined: Dec 2007
Posts: 784
Likes: 0
From: Detroit River/ lake Erie
03-10-2010 | 08:59 PM
#7
Registered
Joined: Dec 2007
Posts: 784
Likes: 0
From: Detroit River/ lake Erie
