I'm wondering if i could have my remote oil filter/oil cooler lines plumbed wrong. I made some changes there, and it's been so long I can't remember exactly what or why. Does anyone have a drawing showing how oil should flow with the remote filter setup? There is an arrow on the filter in showing flow in, but i"m not sure about the block adpter. My adpter has one port pointing towards the flywheel, and one pointing towards the balancer.

Im pretty sure the oil flows from the outside of the filter to the center. Then I have it layed out the following way.

Correct it does flow into the outside of the filter and then comes out the center.

What i really need to know is where it flows into and out of the block adapter. I'm using the merc adapter from a 1989 350 Mag. Here is a link to the part: http://www.mercruiserparts.com/Show_...9+%26+BELOW%29

Not sure which is the in and which is the out.