For Sale Fresh 454 motor 500hp good price
#1
Thread Starter
Registered
Joined: Jul 2009
Posts: 264
Likes: 0
Looking to get rid of the boat project I have going on
heres the specs on the motor
Motor is a completely fresh rebuilt Gen VI 454 BBC motor
Block was zero decked and just freshly honed (it did not need to be bored)
hot tanked and oil and water passages cleaned new freeze plugs etc.
has a complete forged bottom end
502 forged steel crank,
Eagle I beam rods
Stock GM small dome pistons
Plasma file fit rings
Clevite P series bearings
custom hyd roller cam from Bob Madera at Marine Kinetics
Lunati roller rockers
Morel hyd roller lifters
Trend custom pushrods
Early casting large oval port steel heads that were ported a good amount by my engine builder
Manley Severe duty intake valves
Inconel exhaust valves
2.19 intake valves
1.88 exhaust valves
double roller billet timing chain
Melling HV oil pump and pickup
edelbrock performer RPM air gap intake
Barry Grant Demon 850 double pumper carb (rebuilt)
MSD billet distributor (still in the box)
everything in the motor is brand new (except the head castings or other stuff that is noted)
heads were milled and are perfect completely rebuilt
motor is still wrapped up in the garage on the engine stand
100% fresh and brand new
new coat of Por-15 engine paint gloss black,
and a set of Teague Marine Valve covers
also have a brand new set of Stainless Marine exhaust manifolds available if the buyer is interested
also have full accessories for the motor (starter, alternator, sea pump etc. and all brackets if interested)
Looking for $3,500
will ship anywhere in the US
buyer to pay actual shipping, I will crate up the motor and deliver to a shipping terminal free of charge
located on Long Island, NY zip is 11783
please email me at [email protected] if interested
thanks
also have a Baja Force 235 hull with interior in decent shape for cheap, older load rite trailer, and misc. bravo parts, etc
heres the specs on the motor
Motor is a completely fresh rebuilt Gen VI 454 BBC motor
Block was zero decked and just freshly honed (it did not need to be bored)
hot tanked and oil and water passages cleaned new freeze plugs etc.
has a complete forged bottom end
502 forged steel crank,
Eagle I beam rods
Stock GM small dome pistons
Plasma file fit rings
Clevite P series bearings
custom hyd roller cam from Bob Madera at Marine Kinetics
Lunati roller rockers
Morel hyd roller lifters
Trend custom pushrods
Early casting large oval port steel heads that were ported a good amount by my engine builder
Manley Severe duty intake valves
Inconel exhaust valves
2.19 intake valves
1.88 exhaust valves
double roller billet timing chain
Melling HV oil pump and pickup
edelbrock performer RPM air gap intake
Barry Grant Demon 850 double pumper carb (rebuilt)
MSD billet distributor (still in the box)
everything in the motor is brand new (except the head castings or other stuff that is noted)
heads were milled and are perfect completely rebuilt
motor is still wrapped up in the garage on the engine stand
100% fresh and brand new
new coat of Por-15 engine paint gloss black,
and a set of Teague Marine Valve covers
also have a brand new set of Stainless Marine exhaust manifolds available if the buyer is interested
also have full accessories for the motor (starter, alternator, sea pump etc. and all brackets if interested)
Looking for $3,500
will ship anywhere in the US
buyer to pay actual shipping, I will crate up the motor and deliver to a shipping terminal free of charge
located on Long Island, NY zip is 11783
please email me at [email protected] if interested
thanks
also have a Baja Force 235 hull with interior in decent shape for cheap, older load rite trailer, and misc. bravo parts, etc
#7
Thread Starter
Registered
Joined: Jul 2009
Posts: 264
Likes: 0
all emails replied to
got a lot of interest but no buyer yet,
if your interested please email me at [email protected]
must sell ASAP
thanks
got a lot of interest but no buyer yet,
if your interested please email me at [email protected]
must sell ASAP
thanks






