Whipple side mount COMPLETE with intake and F.A.S.T. EFI
07-31-2010 | 06:40 AM
#1
Thread Starter
Registered
Joined: Sep 2007
Posts: 216
Likes: 1
From: Kent Island MD
Whipple side mount COMPLETE with intake and F.A.S.T. EFI
I am building a non blown engine for my boat and I want to sell my COMPLETE supercharged EFI setup which includes:
-Whipple side mount with 7psi pully and intercooler (modified with -10 fittings)
all associated bracketry that it is mounted with etc.
-The upper and lower (454 magnum) efi manifold with 60# injectors and modified fuel rails with a -8 supply and -6 return and a billet aeromotive regulator,I removed the auxilliary injectors and did things the right way.The lower intake has some pitting in the aluminum around the water ports (salt water) I epoxied them and there are absolutely no issues with anything. I will however weld it from the bottom and resurface it if that is a deal breaker.
-F.A.S.T. CLASSIC EFI computer and wiring harness along with all sensors including functional o2 (i only used it to tune a few times and ran it dry to keep from destroying it)
-The EFI has a conservative tune in it for iron heads and 93 octane with a mild 454 BUT the sky is the limit as far as tuning goes.
I want $2500.00 obo for all of it, it is all still on the boat but will be removed tomorrow (sunday 8/1). Im really not looking for trades but maybe interested????
Bill
[email protected]
-Whipple side mount with 7psi pully and intercooler (modified with -10 fittings)
all associated bracketry that it is mounted with etc.
-The upper and lower (454 magnum) efi manifold with 60# injectors and modified fuel rails with a -8 supply and -6 return and a billet aeromotive regulator,I removed the auxilliary injectors and did things the right way.The lower intake has some pitting in the aluminum around the water ports (salt water) I epoxied them and there are absolutely no issues with anything. I will however weld it from the bottom and resurface it if that is a deal breaker.
-F.A.S.T. CLASSIC EFI computer and wiring harness along with all sensors including functional o2 (i only used it to tune a few times and ran it dry to keep from destroying it)
-The EFI has a conservative tune in it for iron heads and 93 octane with a mild 454 BUT the sky is the limit as far as tuning goes.
I want $2500.00 obo for all of it, it is all still on the boat but will be removed tomorrow (sunday 8/1). Im really not looking for trades but maybe interested????
Bill
[email protected]
08-16-2010 | 09:17 AM
#5
Registered
Joined: Nov 2005
Posts: 40
Likes: 0
From: Athens, Alabama
09-28-2010 | 12:01 PM
#9
Registered
Joined: Jun 2010
Posts: 113
Likes: 0
From: Scottsdale, AZ
still for sale?
please email pics to [email protected]
Last edited by andychb; 09-28-2010 at 12:03 PM. Reason: pm full
