optioning a new cigarette
09-08-2010 | 11:02 PM
#1
Thread Starter
Registered
Joined: Apr 2010
Posts: 122
Likes: 0
optioning a new cigarette
what would you put in boat. hear is what i have.
1. 700 sc and #6 drives
2. toilet with macerator and holding tank. (wife)
3. billet package
4. dock lights
5. inverter
6.No stereo will do high end at home.
7.fender holders
8.more engine room lights
9 shore power
10. battery charger
and also the standard equipent.
1. 700 sc and #6 drives
2. toilet with macerator and holding tank. (wife)
3. billet package
4. dock lights
5. inverter
6.No stereo will do high end at home.
7.fender holders
8.more engine room lights
9 shore power
10. battery charger
and also the standard equipent.
09-09-2010 | 05:14 AM
#2
Registered
Joined: Jul 2006
Posts: 886
Likes: 0
From: Ft. Lauderdale Florida & Tarpon Springs Florida
what would you put in boat. hear is what i have.
1. 700 sc and #6 drives
2. toilet with macerator and holding tank. (wife)
3. billet package
4. dock lights
5. inverter
6.No stereo will do high end at home.
7.fender holders
8.more engine room lights
9 shore power
10. battery charger
and also the standard equipent.
1. 700 sc and #6 drives
2. toilet with macerator and holding tank. (wife)
3. billet package
4. dock lights
5. inverter
6.No stereo will do high end at home.
7.fender holders
8.more engine room lights
9 shore power
10. battery charger
and also the standard equipent.
09-09-2010 | 07:21 AM
#7
Registered
Joined: Apr 2001
Posts: 6,305
Likes: 36
From: Naples, Maine
09-09-2010 | 08:31 AM
#9
Forum Regulator
Joined: May 2001
Posts: 24,203
Likes: 1,592
From: Worldwide
Do not put dock lights on the bow. They are worthless and ugly.
Make sure EVERY light on the boat is LED.
You do want underwater transom lights.
Have them install an extra rigging tube on each side of the boat from the front of the engine room to the middle of the cabin. As a matter of fact, have them install two on the port, and one on the starboard. This would be for your stereo install. You will have easy and unobstructed access from front to back with your own tubes for stereo signal. The extra tube on the port side will be for power from your engine room to your cabin where your amps/capacitors/extra batteries will be.
The less chrome/stainless you put on the boat, the less polishing you have to do. Powdercoat/paint/anodize everything.
Make sure EVERY light on the boat is LED.
You do want underwater transom lights.
Have them install an extra rigging tube on each side of the boat from the front of the engine room to the middle of the cabin. As a matter of fact, have them install two on the port, and one on the starboard. This would be for your stereo install. You will have easy and unobstructed access from front to back with your own tubes for stereo signal. The extra tube on the port side will be for power from your engine room to your cabin where your amps/capacitors/extra batteries will be.
The less chrome/stainless you put on the boat, the less polishing you have to do. Powdercoat/paint/anodize everything.
