Was wondering if you guys could shed any light due to trim problems etc.

thanks for all your help

Whats the issue?

Lack of information

sorry what I was trying to get at was obviously you can fit a swim platform to the back of the rig just like on cigs donzi and all your other go fasts but trim and tilt for outboards poses the issue..?

http://www.stainlessmarine.com/index...id=47&Itemid=1

This looks like a good design but if the engines are mounted this far back it may harm weight distribution..?

Works for me!

The new Phantom 30 with outboards has a large back area very cool design and dam fast!!

rchevelle71 sdid it on a 24 Pantera looks and rides great!

Thanks for posting the pics Ray, I am hoping it rides even better now that I lowered the motor back down to reality, I changed the water pump, and had a sticky thermostat, so I changed both out, that may explain the higher temps last weekend. Also just found out about a screen I need to clean that should put my fuel pressure in the ball park, and a slight timing mod(TPS adjustment), so once I get the motor set up right, I'll slap that 300 comp on and go for a hell ride Also looking at some 300 promax heads, and a MadEFI setup, the wife is gonna Kill me, if I dont do it myself first may not run the keys this weekend, weather isnt looking great with chance of T-storms, and windy, i'll let ya know whats up.