Where can I pick up a pair of braided lines for my k-planes? One side is already done...need to do opposite side, who handles these?....They are short, about a foot long including ends....Thanks Fred

Mine are not braided but they look the same size as the external braided lines for the drive trim. Check them out, they may be the same.

You can have any hydraulic parts shop custom make your lines @ any length,diameter, material, or hose fittings. I replaced all of my plane hoses w/braided stainless. Be prepared to spend some money, they are not cheap. The hoses just from the transom to the cylinder like you are describing cost me about 30$ a hose.

Those hoses are standard off the shelf items. Call Doller Offshore Marine in FL. I think I bought a set from them a few years back.
Gary

I got a hold of Doller....they have them at 30.15 each, Thanks for the info,...Fred

You can also use some Russell fittings.

I got mine from NAPA. THey are the exact length and saved me about 10 bucks each.

Jon

Too late now....I already put in an order for the lines and a few other items from Doller Offshore...hey Audiofn...were those lines from NAPA braided steel ones?....if so I will check that out next time, Thanks, Fred