Gimbal replacement, XR, HP or IMCO?
10-12-2010 | 12:11 PM
#1
Thread Starter
Registered
Joined: Oct 2005
Posts: 357
Likes: 7
Gimbal replacement, XR, HP or IMCO?
My gimbal and ring are destroyed, now I have to replace. Would like to improve the safety factor, but also don't want to go over kill.
XR, HP or IMCO?? (what is the difference?)
Stainless gimble ring?
What type of full Hydraulic steering?
Currently the 21' boat will do 81 MPH on GPS, the hull is V bottom with pad. Would assume with a fresh motor, would get in the high 80's. So using a maximum speed of 90 MPH.
What should I do?
XR, HP or IMCO?? (what is the difference?)
Stainless gimble ring?
What type of full Hydraulic steering?
Currently the 21' boat will do 81 MPH on GPS, the hull is V bottom with pad. Would assume with a fresh motor, would get in the high 80's. So using a maximum speed of 90 MPH.
What should I do?
10-12-2010 | 12:37 PM
#2
Offshoreonly Advertiser
Joined: Oct 2002
Posts: 1,365
Likes: 34
From: De.
If you want the IMCO Gimbal you will have to have a full hydraulic steering system.
__________________
www.diamondperformanceparts.com
[email protected]
http://www.facebook.com/pages/Diamon...07878772615803
302-521-0123
The Best Parts & Service At The Best Price
www.diamondperformanceparts.com
[email protected]
http://www.facebook.com/pages/Diamon...07878772615803
302-521-0123
The Best Parts & Service At The Best Price
10-12-2010 | 03:18 PM
#3
Registered
Joined: Aug 2005
Posts: 6,306
Likes: 1
From: Between A Womans Leggs in IL
Fixx
in your case http://watertown.craigslist.org/boa/1966024392.html
get the conversion standoff box and trans from arneson and go 90mph
get the conversion standoff box and trans from arneson and go 90mph
we have it
