Imco Powerflows
11-11-2010 | 01:01 PM
#1
Thread Starter
Registered
Joined: Mar 2009
Posts: 61
Likes: 0
From: somewhere between paso & LA
Imco Powerflows
JUST wondering if anyone can tell me why my powerflows
don't have jumper hoses from the manifold to the risers, and
every other set I see does? new to the outdrive stuff, used
to over transom bassett's , if ya know what I mean!
don't have jumper hoses from the manifold to the risers, and
every other set I see does? new to the outdrive stuff, used
to over transom bassett's , if ya know what I mean!
11-11-2010 | 03:19 PM
#2
Registered
Joined: Nov 2009
Posts: 672
Likes: 0
older set maybe open manifould water flows though manifould into risers trough a gasget like water flows throught engine block to the heads paul from england
Last edited by paul buckner; 11-11-2010 at 03:24 PM. Reason: bad spelling
11-12-2010 | 01:25 AM
#4
Charter Member # 55
Joined: Oct 2000
Posts: 20,232
Likes: 2,482
From: Omaha/LOTO
Imco's have a wet joint between the manifold and the riser instead of using a jumper hose.
If there is a hose hooked to the riser bunge, then it is from the bypass on the older 4 hose tstat housings.
Click the link and on the picture and you can see where the water flows through on the gasket.
http://www.imcomarine.com/ca_store/i...roducts_id=806
If there is a hose hooked to the riser bunge, then it is from the bypass on the older 4 hose tstat housings.
Click the link and on the picture and you can see where the water flows through on the gasket.
http://www.imcomarine.com/ca_store/i...roducts_id=806
