A short clip of my warlock on the trailer running after we broke the cam in. Let me know what you guys think...thanks mark! (I've done a lot of work to this boat in the past several months....presonally, I'm pretty happy with how it came out and sounds)

http://www.youtube.com/watch?v=n1o8Liejc-M

what cam? what motor...

It's a 454, 396 closed chamber heads, msd ignition, edelbrock intake, holley 750dp, stainless marine exhaust, etc...with a crane hyd. flat tapped cam in it. Here's the cam specs:

Part Number CRN-132561
Basic Operating RPM Range 2,800-5,800
Duration at 050 inch Lift 228 int./236 exh.
Intake Valve Lift with Factory Rocker Arm Ratio 0.530 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio 0.551 in.
Lobe Separation (degrees) 114

Nice you will like it I'm running a 502 with a Ultradyne hyd roller 228/236 0.630 in/ 0.630ex 112 with long ss emi pulls strong the whole power curve 0 to wot
http://www.youtube.com/watch?v=0Edrq...eature=related

That's a nice boat! Sounds sweet! I have a 502 that I'm collecting parts for right now also. Hope to have that one in the boat in the next year or two.