Twin power steering
05-15-2011 | 11:24 AM
#1
Thread Starter
Registered
Joined: Oct 2010
Posts: 123
Likes: 0
From: Holland, MI
Twin power steering
Hi,
I have a twin 454 setup and noticed that the steering control cable runs into the port motor steering ram, while the starboard motor has the belt off of the p pump and with no ram, while the hydro line is pinched off. (the outdrives are connected externally)
My Q is: 1) Is this normal?
2) can I add a ram to the starboard motor?
3) If so, how is it controlled?
I have a twin 454 setup and noticed that the steering control cable runs into the port motor steering ram, while the starboard motor has the belt off of the p pump and with no ram, while the hydro line is pinched off. (the outdrives are connected externally)
My Q is: 1) Is this normal?
2) can I add a ram to the starboard motor?
3) If so, how is it controlled?
