any real life story of dana exhaust gains???
#3
my prop is already under revving a tad so i would guess that the little extra power should rev right on.
#4
Registered

Joined: Dec 2009
Posts: 711
Likes: 37
From: Florence, Kentucky
A friend just did a Mag to HO swap on a 288 sundsation. Said there was a significant lift in the hole shot and top end pulled stronger than before. not apples to apples because of the full HO swap but it was a part of the toolbox.
#6
Registered
Joined: Oct 2009
Posts: 277
Likes: 0
#8
Registered
Joined: Aug 2010
Posts: 23
Likes: 0
From: Union, KY
I've heard about the midrange improvement. Funny thing is I can't tell any difference out of the hole or midrange. All my improvement was at the top end- above 4000 rpms or 60 mph for me. I'm sure some of it is prop. I run a Bravo 4 blade 26p which turned 4900 rpm before now at 5050 rpm. That may be some of the reason I was able to achieve such a "big" top end gain, if you consider 3-4mph big.
#10
on the fence still. i might go for it anyways. we will see how much my covers are going to cost me. having bow cover made and full encloser to give me more space for my weekend stays.
between that and buying a house not sure what im going to have left. lol
between that and buying a house not sure what im going to have left. lol




