timing procedure on efi motor
06-08-2002 | 08:57 PM
#1
Thread Starter
Registered
Joined: Jul 2001
Posts: 802
Likes: 0
From: Pasadena Md
timing procedure on efi motor
i have a 1999 7.4 mag what is the proper procedure for setting(changing) timing on this motor. i am doing a little start of the season checkup (timing fuel pressure cylinder pressure etc.) and would like to know the correct way to set timing on this motor if it needs to be changed. thanx
06-09-2002 | 09:16 AM
#2
Registered
Joined: May 2002
Posts: 437
Likes: 53
From: Stoney Creek, MD
You need to contact Rinda technologies to get a trouble code reader for the computer. This device when active also sets the computer in diagnostic mode so that you can set the base timing. It is only about 40 bucks. The web site is www.rinda.com.
