removing cockpit floor panel in a 232
10-12-2011 | 06:27 PM
#1
Thread Starter
Registered
Joined: Sep 2007
Posts: 151
Likes: 0
From: Volo, IL (the chain)
removing cockpit floor panel in a 232
Hi guys, ive got a 232 baja, and the floor is a little saggy between the bolsters, id like to remove it and have it reinforced somehow this winter. i tried doing this last year but was unsuccessful...I removed all the screws on the top and the screws in the back under the rear seat hatch. almost seems like its caulked in there or something. has anyone ever done this before? thanks
10-13-2011 | 12:49 PM
#2
Registered
Joined: Jun 2010
Posts: 392
Likes: 0
From: Birmingham, AL
I believe it is an identical setup to my 252. If so you will also have to remove the front seats and the rear seat and base (along with hatch actuator, perko switch and stereo amp) which of course is a lot of trouble. Mine then lifted right out.
Dan
Dan
