1 XR lower complete 1.5 ratio mechanincly perfect. stbd prop on triple engine setup hit side of gear case. 600.00

2 HP 500 flame arrestors OK condition 40.00 ea

2 new mercury 500 EFI fuel lines from EFI filter to cool fuel
40.00 ea.

1 BBC mark 4 cast aluminum oil pan 12 oil pan off of a mercury 500 bulldog. it is relived for stroker setups. I have the dipstic. the pan has mercury performace products casted in the sides. very cool oil pan 180.00

1 mando 55 amp 4 wire mercruiser alternator from 500hp or 525 sc painted blue 80.00

1 11 foot quiksilver inflatable boat with hard bottom and transom. good shape with title and carrying bag. 600.00



1 imco 3 spoke 6 bolt polished steering wheel with black grip.new 50.00

1 used formuling style 8 bolt steering wheel 4 spokewhite grip poilshed spokes. 30.00

1 HP 500 stye sea water pump only with fuel pump mount. and blue pully. 80.00

2 complete sets of HP 500 ign module and knock module with harnesses. 1 harness is complete un cut the other harness has some cut wires 180.00 ea

1 prop bravo 1 24 pitch RH good condition with hub300.00

1 new marinco polished stainless shore power recetical. to plug your boat in 30amp 40.00

1 new BEP marine 300 amp automatic battery switch as used by outerlimts 100.00

1 used BEP automatic VSR module 300amp used for joining battery banks at the touch of a swict 80.00

1 set barely used small block billet polished valve cover with cherolet embossed on them. center bolt style 90.00

all prices are plus ship. send me your e mail for any pics you may want.

Do you have any pictures of this?


1 prop bravo 1 24 pitch RH good condition with hub300.00

1 HP 500 stye sea water pump only with fuel pump mount. and blue pully. 80.00

Shoot me some pics of this unit to [email protected]

thanks Joe

can u email a picture of the pan to [email protected]ks MIKE T

[email protected]

2 HP 500 flame arrestors OK condition 40.00 ea

pics? [email protected]

Not the one I am looking for...Thanks for the pics though

If you could send pics of the steering wheels to [email protected]

Also the appx center to center bolt pattern measurement. I have some old school project I am trying to adapt to.

Thanks,
John

i am very interested in this pan,please send picture. [email protected]

pm sent!